The industrial style has been very trendy for several years. And to perfect your room, nothing beats an industrial effect coating to be applied to the wall. Here are some tips on how to do it right, staged with the Decorative Home Industry coating… Before you start, you need: - A paint roller. - A brush. - A trowel. - The industrial effect coating + undercoat. Start by applying with the roller the undercoat of decorative plaster, which is used to prepare the wall for the plaster. With the brush, apply the plaster after mixing it well. Proceed in zones of 30 to 50 cm². Use a trowel on the fresh product to smooth. Then pass a second layer, this time with the trowel to create the effect. Take little product and make short, rounded gestures in all directions. When the product begins to dry, press the float without product by pressing to give an effect and nuances. Remember to regularly clean the trowel between applications with a damp sponge to avoid scratches. Finally, if you wish, you can even iron a third layer. And now it's up to you !